Microgrid for SCU with Vehicle-to-Grid

Santa Clara University is a large loads in Santa Clara needed two finders and a maximum of over 8MW peak demand; however, this consumption will only increase as the student body and electric vehicles on campus continue to grow. To meet this rising demand in both a sustainable and environmentally friendly manner, we proposed and simulated a complete energy management system with cost analysis of energy savings of a microgrid capable of reducing the power supplied to Santa Clara University’s campus from the grid by 40% using renewable energy, vehicle-to-grid (V2G) functionality, and real SCU energy data. The project further used machine learning to match SCU’s energy demand with the renewable generation for future use of optimizing the proposed system. The microgrid was simulated in MATLAB while the machine learning algorithm was developed in python. The benefits of this project provide SCU with a path to 100% clean energy, increased power reliability, and reduced operating cost for SCU. Increasing solar output on campus is the best way to achieve 100% renewable energy because the fuel cells on campus have a byproduct of carbon dioxide and are therefore not 100% renewable. Our vehicle to grid analysis showed that it is not currently a viable solution to help SCU run on 100% renewable energy; however, as electric vehicle charging capacity at SCU increases, vehicle to grid could become an important part of SCU achieving carbon neutrality

Stretching single polysaccharide molecules using AFM: A potential method for the investigation of the intermolecular uronate distribution of alginate?

Illustrative examples of the way in which the molecular force-extension behaviour of polysaccharides is governed by the nature of the linkage between their constituent pyranose rings are presented for a series of standard homopolymers. These results agree with previously proposed general hypotheses regarding the possibility of generating force-induced conformational transitions, and with the predictions of a model in which the inter-conversion of pyranose conformers is assumed to be an equilibrium process on the timescale of the molecular stretching. Subsequently, we investigate the potential of the technique in the characterisation of co-polymeric polysaccharides in which the nature of the glycan linkages is different between the two distinct residue types. Specifically, we explore the possibility that the ratio of mannuronic acid (M) to guluronic acid (G) in alginate chains will be reflected in their single molecule stretching behaviour, owing to their contrasting equatorial and axial linkages. Furthermore, as the technique described interrogates the sample one polymer at a time we outline the promise of, and the obstacles to, obtaining a new level of characterisation using this methodology where differences observed in the single molecule stretching curves obtained from single alginate samples reflectsomething of the real intermolecular distribution of the M / G ratio

Beyond Goldwater-Nichols

This report culminated almost two years of effort at CSIS, which began by developing an approach for both revisiting the Goldwater-Nichols Department of Defense Reorganization Act of 1986 and for addressing issues that were beyond the scope of that landmark legislation

ACVIM consensus statement guidelines for the diagnosis, classification, treatment, and monitoring of pulmonary hypertension in dogs.

Pulmonary hypertension (PH), defined by increased pressure within the pulmonary vasculature, is a hemodynamic and pathophysiologic state present in a wide variety of cardiovascular, respiratory, and systemic diseases. The purpose of this consensus statement is to provide a multidisciplinary approach to guidelines for the diagnosis, classification, treatment, and monitoring of PH in dogs. Comprehensive evaluation including consideration of signalment, clinical signs, echocardiographic parameters, and results of other diagnostic tests supports the diagnosis of PH and allows identification of associated underlying conditions. Dogs with PH can be classified into the following 6 groups: group 1, pulmonary arterial hypertension; group 2, left heart disease; group 3, respiratory disease/hypoxia; group 4, pulmonary emboli/pulmonary thrombi/pulmonary thromboemboli; group 5, parasitic disease (Dirofilaria and Angiostrongylus); and group 6, disorders that are multifactorial or with unclear mechanisms. The approach to treatment of PH focuses on strategies to decrease the risk of progression, complications, or both, recommendations to target underlying diseases or factors contributing to PH, and PH-specific treatments. Dogs with PH should be monitored for improvement, static condition, or progression, and any identified underlying disorder should be addressed and monitored simultaneously

Role of center vortices in chiral symmetry breaking in SU(3) gauge theory

We study the behavior of the AsqTad quark propagator in Landau gauge on SU(3) Yang-Mills gauge configurations under the removal of center vortices. In SU(2) gauge theory, center vortices have been observed to generate chiral symmetry breaking and dominate the infrared behavior of the quark propagator. In contrast, we report a weak dependence on the vortex content of the gauge configurations, including the survival of dynamical mass generation on configurations with vanishing string tension.Comment: 8 pages, 9 figure

The Radio Evolution of SN 2001gd

We present the results of observations of the radio emission from Supernova 2001gd in NGC 5033 from 2002 February 8 through 2006 September 25. The data were obtained using the Very Large Array at wavelengths of 1.3 cm (22.4 GHz), 2 cm (14.9 GHz), 3.6 cm (8.4 GHz), 6 cm (4.9 GHz), and 20 cm (1.5 GHz), with one upper limit at 90 cm (0.3 GHz). In addition, one detection has been provided by the Giant Metrewave Radio Telescope at 21 cm (1.4 GHz). SN 2001gd was discovered in the optical well past maximum light, so that it was not possible to obtain many of the early radio "turn-on" measurements which are important for estimating the local circumstellar medium (CSM) properties. Only at 20 cm were turn-on data available. However, our analysis and fitting of the radio light curves, and the assumption that the Type IIb SN 2001gd resembles the much better studied Type IIb SN 1993J, enables us to describe the radio evolution as being very regular through day ~550 and consistent with a nonthermal-emitting model with a thermal absorbing CSM. The presence of synchrotron-self absorption (SSA) at early times is implied by the data, but determination of the exact relationship between the SSA component from the emitting region and the free-free absorption component from the CSM is not possible as there are insufficient early measurements to distinguish between models. After day ~550, the radio emission exhibits a dramatically steeper decline rate which, assuming similarity to SN 1993J, can be described as an exponential decrease with an e-folding time of 500 days. We interpret this abrupt change in the radio flux density decline rate as implying a transition of the shock front into a more tenuous region of circumstellar material. A similar change in radio evolution has been seen earlier in other SNe such as SN 1988Z, SN 1980K, and SN 1993J.Comment: 3 tables, 2 figures, To appear in the Astrophysical Journa

Workplace design for the Australian residential aged care workforce

Objectives: This research explored residential aged care (RAC) workplace design features that influence how RAC staff feel valued, productive, safe, like they belong and connected. A secondary aim was to validate emerging themes about RAC design features with stakeholders. Methods: A multistage qualitative study was conducted in one RAC facility with 100 residents in outer metropolitan Melbourne: (i) photo-elicitation – photographs were used to prompt discussions with RAC staff; (ii) individual interviews with RAC directors; and (iii) validity testing with the advisory committee occurred. Results: Key workplace design features that influenced how RAC staff feel valued, productive, safe, like they belong and connected included the following: (i) home-like environment; (ii) access to outdoor spaces; (iii) quality indoor environment; and (iv) access to safe, open and comfortable workplaces. Conclusions: Key workplace design features that matter to RAC staff in a ‘shared workspace’ exist. Increasing demands upon RAC requires evidence-based workplace design policy and evaluation approaches that support RAC staff to work in RAC shared workspaces. © 2018 AJA Inc. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Kurt Seemann” is provided in this record*

Hot gas ingestion characteristics and flow visualization of a vectored thrust STOVL concept

A 9.2 percent scale short takeoff and vertical landing (STOVL) hot gas ingestion model was designed and built by McDonnell Douglas Corporation (MCAIR) and tested in the NASA Lewis Research Center 9- by 15-Foot Low Speed Wind Tunnel (LSWT). Hot gas ingestion, the entrainment of heated engine exhaust into the inlet flow field, is a key development issue for advanced short takeoff and vertical landing aircraft. The Phase 1 test program, conducted by NASA Lewis and McDonnell Douglas Corporation, evaluated the hot ingestion phenomena and control techniques and Phase 2 test program which was conducted by NASA Lewis are both reported. The Phase 2 program was conducted at exhaust nozzles temperatures up to 1460 R and utilized a sheet laser system for flow visualization of the model flow field in and out of ground effects. Hot gas ingestion levels were measured for the several forward nozzle splay configurations and with flow control/lift improvement devices which reduced the hot gas ingestion. The model support system had four degrees of freedom, heated high pressure air for nozzle flow, and a suction system exhaust for inlet flow. The headwind (freestream) velocity for Phase 1 was varied from 8 to 90 kn, with primary data taken in the 8 to 23 kn headwind velocity range. Phase 2 headwind velocity varied from 10 to 23 kn. Results of both Phase 1 and 2 are presented. A description of the model, facility, a new model support system, and a sheet laser illumination system are also provided. Results are presented over a range of main landing gear height (model height) above the ground plane at a 10 kn headwind velocity. The results contain the compressor face pressure and temperature distortions, total pressure recovery, compressor face temperature rise, and the environmental effects of the hot gas. The environmental effects include the ground plane temperature and pressure distributions, model airframe heating, and the location of the ground flow separation. Results from the sheet laser flow visualization test are also shown

Internet cigarette vendors make tax-free claims and sell cigarettes cheaper than retail outlets: Table 1

This paper aims to (1) assess whether promotion of tax-free sales among Internet cigarette vendors (ICVs) changed between 2009 and 2011, (2) determine which types of ICVs are most likely to promote tax-free sales (e.g., US-based, international, or mixed location ICVs), and (3) compare the price of cigarettes advertised in ICVs to prices at brick-and-mortar retail outlets

Is Flint Corn Naturally Resistant to Maize Weevil Infestation?

Sitophilus zeamais (maize weevil) is one of the most destructive pests of maize stored in tropical and subtropical regions. This study determined the resistance of flint corn and dent corn to infestation by S. zeamais (Motschulsky), the maize weevil. Improved King Philip hybrid flint corn and Fontanelle 6T-510 hybrid dent corn were used in this experiment. Two temperature conditions (10 °C and 27 °C) and two storage times (15 days and 30 days) were used. Results showed that flint corn was more resistant to insect damage than dent corn at 27 °C and 30 day storage time. After 30 days storage time and 27 ºC death rate was significantly higher in flint corn (R2 = 0.945) compared to (R2 = 0.634) in dent corn. Damaged seed was 10% higher in dent corn then in flint corn at 27 ºC and 30 days. However, no significant difference was observed for seed weight loss between flint corn and dent corn at the same storage conditions. Both dent and flint corn are extensively cultivated in developing countries. It appears that storage of flint corn may be one promising solution to reducing corn damage and infestation problems in the tropics and in developing countries, but more research is needed